Products
Fluorocarbon varnish D-FC-205
Category:
Exterior Wall Latex Paint Series
Tel:
E-mail:
Introduction
Product Description
This product is a two-component coating with fluorocarbon resin as the main component, which can serve as a protective topcoat for various coatings and substrates, especially important for the protective topcoat of aluminum powder metallic paint. It can comprehensively improve its self-cleaning, protective, decorative properties, and service life.
Product Features
Super weather resistance, corrosion resistance, strong self-cleaning.
Strong adhesion, high decorative properties, waterproof, mold-resistant, acid-resistant, alkali-resistant. Good film properties: flexibility, scratch resistance, washability.
Excellent resistance to fading, peeling, cracking, chalking, and abrasion. High transparency, high hardness, high fullness.
Physical Parameters
Solid content: ≥50% Density: (1.05~1.15) g/ml. Flash point: above 25℃.
Drying time: surface dry in 20 minutes, fully dry in 24 hours, completely cured in 7 days. Temperature (23±2)℃. Theoretical coverage: (8~10) square meters/kg (dry film thickness 20 microns).
Mixing ratio: A component:B component = 1:0.090 (by weight), refer to packaging label. Usable period: use within 8 hours after mixing. Temperature (23±2)℃.
Storage: Store in a cool, dry place, effective storage period A component one year, B component six months. Packaging: 18 kg/set.
Construction Instructions
Construction method: suitable for conventional spraying, dilution ratio (0~20)% (by weight).
Construction conditions: construction temperature (5~40)℃; relative humidity less than 75%, avoid construction in rain, snow, or fog, prohibit contact with water and alcohols. Mix and stir A and B components according to the ratio evenly, use after curing for 30 minutes, and use within 8 hours.
Recommended Matching: D-FC-601 single-component epoxy sealing primer; D-FC-301 fluorocarbon paint special intermediate paint; D-FC series topcoat; D-FC-205 fluorocarbon varnish thinner: D-X-2 thinner.
Film thickness: dry film: (15~20) microns.
Coating interval: minimum 8 hours, temperature (23±2)℃; spraying can use wet-on-wet method. Tool cleaning: D-X-2 thinner.
Safety and Environmental Instructions
Avoid paint contact with skin and eyes; if contact occurs, rinse with clean water. The site must be well-ventilated. The paint contains flammable components, please keep away from sparks and prohibit smoking in nearby areas. Comply with all health and safety regulations on site.
Key words:
Fluorocarbon varnish D-FC-205
Previous Page:
Message
Related Products
Message
* Note: Make sure you fill in the information accurately and keep the communication open, we will contact you as soon as possible.
Contact Us
No.19, Jingkai Second Avenue, Zhengzhou Economic and Technological Development Zone, China
Telephone
Page Copyright©Henan Dejiali Technology Group Co., Ltd.
Powered by :www.300.cn Supported IPV6 Privacy Agreement
