Products
Silicone acrylic gloss paint
Category:
Exterior Wall Latex Paint Series
Tel:
E-mail:
Introduction
Product Description
Silicone acrylic gloss paint is made from imported silicone emulsion, used for surface treatment after the application of interior and exterior wall latex paint and real stone paint. The coating treated with gloss paint has characteristics such as waterproof, pollution-resistant, and mold-resistant. Additionally, the coating has good aging resistance, strong decorative effect, and a smooth, flat film, making it an excellent wall treatment material. It is suitable for surface glossing of various water-based coatings.
Product Features
1. The paint film has bright gloss, is durable, and maintains its freshness;
2. Has good weather resistance, enhancing the color retention of the coating;
3. Does not discolor or yellow, improving pollution resistance.
Physical Parameters
Drying time: ≤2 hours (23±2) °C
Recoat time: ≥4 hours (23±2) °C, not exceeding 7 days. Theoretical coverage rate: 5 square meters/kilogram (two coats). Packaging: 20 kilograms/barrel (subject to actual packaging).
Storage: Should be stored in a cool, ventilated, dry place without frost (5~35) °C, with a shelf life of one year.
Construction Instructions
Surface Treatment: Before applying the coating, the substrate surface should be clean, dry, flat, firm, and free of dust.
For newly constructed walls, remove surface dust, grease, and loose mortar, and repair any gaps in a timely manner.
For repainting walls, use a scraper to remove the original paint film and fill and smooth the surface. Use appropriate methods as needed.
Ensure that the moisture content of the pre-coated substrate does not exceed 10%, and the pH value does not exceed 10. Construction methods: rolling and spraying.
Mixing and Dilution: This product should not be diluted with water in principle. If the construction environment temperature is too high, a small amount of water may be added for dilution, not exceeding 3%, and mix thoroughly again after dilution.
Construction Conditions: Construction temperature above 5°C; maximum relative humidity of 85%. Recoat interval: not less than 2 hours (23°C).
Tool Cleaning: Clean all tools immediately with water after painting.
Technical Parameters
Comply with GB/T9755-2001 'Synthetic Resin Emulsion Exterior Wall Coatings' and GB 24408-2009 'Limit of Harmful Substances in Exterior Wall Coatings for Construction' standards.
Health and Safety
Avoid contact with eyes; if contact occurs, rinse with clean water. The site must be well-ventilated, and all health and safety regulations must be followed.
Note: The above information and data are based on laboratory and practical experience, and may vary due to factors such as construction processes, testing methods, and coating improvements.
Key words:
Silicone acrylic gloss paint
Previous Page:
Message
Related Products
Message
* Note: Make sure you fill in the information accurately and keep the communication open, we will contact you as soon as possible.
Contact Us
No.19, Jingkai Second Avenue, Zhengzhou Economic and Technological Development Zone, China
Telephone
Page Copyright©Henan Dejiali Technology Group Co., Ltd.
Powered by :www.300.cn Supported IPV6 Privacy Agreement
