Products
Elastic Exterior Wall Paint Series
Category:
Exterior Wall Latex Paint Series
Tel:
E-mail:
Introduction
Product Overview
This product is made from a surface cross-linked elastic acrylic copolymer emulsion based on specially functional monomers. It is refined using high-quality pigments, fillers, and additives. This results in a single-component elastic coating that integrates multiple functions such as high elasticity, waterproofing, pollution resistance, moisture resistance, mildew resistance, and high durability. It is widely applicable for decorating cement wall surfaces of various buildings made from cement, concrete, bricks, and other construction materials.
Product Characteristics
1. Excellent water resistance, alkali resistance, strong scrub resistance, and strong adhesion.
2. Excellent coating water resistance and breathability, good crack resistance.
3. Excellent coating weather resistance.
4. Can automatically cover existing cracks on the wall surface and fine cracks that may develop.
Physical Parameters
Solid Content: ≥50%
Density: (1.35~1.40) grams per milliliter (light color) Color: Refer to the Degalili color card
Drying Time: ≤2 hours (23+2) °C Recoating Time: ≥2 hours (23+2) °C Theoretical Coverage Rate: 5 square meters/kilogram (two coats)
Packaging: 20 kilograms/barrel (subject to actual packaging)
Storage: Should be stored in a cool, ventilated, dry place without frost (5~35) °C, with a shelf life of one year.
Construction Instructions
Surface Treatment: Before painting, the substrate surface should be clean, dry, flat, and firm.
For newly constructed walls, remove surface dust, grease, and loose mortar. Repair any gaps in a timely manner.
For repainting walls, use a scraper to remove the existing paint film and fill and smooth the surface. Use appropriate methods as needed. Ensure that the moisture content of the pre-coated substrate does not exceed 10%, and the pH value does not exceed 10. Construction methods: brushing, rolling, high-pressure airless spraying.
Mixing and Dilution: Dilute with (10~20)% clean water according to site conditions. Construction Conditions: Construction temperature (5~35) °C; maximum relative humidity 85%. Recoating Interval: no less than 2 hours (23°C).
Tool Cleaning: Clean all tools immediately with water after painting.
Precautions: After applying the exterior latex paint, consider that the latex paint requires a week of water avoidance time. During this period, the latex paint undergoes a complete drying process. If it is not completely dry and gets rained on, the latex paint may fade and turn white. Be sure to avoid rainwater after construction.
Technical Parameters
Health and Safety
Avoid contact with eyes; if contact occurs, rinse with clean water. The site must be well-ventilated, and all health and safety regulations must be followed.
Note: The above information and data are based on laboratory and practical experience, and may vary due to factors such as construction processes, testing methods, and paint improvements.
Key words:
Elastic Exterior Wall Paint Series
Previous Page:
Next page:
Message
Related Products
Message
* Note: Make sure you fill in the information accurately and keep the communication open, we will contact you as soon as possible.
Contact Us
No.19, Jingkai Second Avenue, Zhengzhou Economic and Technological Development Zone, China
Telephone
Page Copyright©Henan Dejiali Technology Group Co., Ltd.
Powered by :www.300.cn Supported IPV6 Privacy Agreement
