Products
Nano exterior wall paint (pearl paint)
Category:
Exterior Wall Latex Paint Series
Tel:
E-mail:
Introduction
Product Overview
This product uses a new type of organic silicon water-based polymer as the base material, combined with high-quality, weather-resistant pearl glitter pigments and various high-quality additives, processed through advanced technology. It is widely applicable for decorating cement wall surfaces of various buildings made of cement, concrete, bricks, and other construction materials.
Product Characteristics
1. The addition of special glitter materials gives the coating a rich color and unique pearl luster. This luster creates a charming pearl sheen that is soft and bright, situated between "soft satin" and "glitter."
2. Utilizing the dual-synergistic dual-repellent mechanism of nano materials enhances the hardness and flexibility of the paint, improves its aging and pollution resistance, and provides self-cleaning functionality, keeping it looking new even after rain.
3. Due to the chemical stability, UV resistance, and moisture resistance of special glitter materials, they greatly outperform ordinary paints. 4. This coating has a "metallic" effect but is non-metallic, with a service life of up to 10 years.
Physical Parameters
Solid content: ≥50%
Density: (1.35~1.40) g/ml (light color) Color: Refer to the Degali color card Drying time: ≤2 hours (23±2) °C Recoating time: ≥2 hours (23±2) °C Theoretical coverage: 5 square meters/kg (two coats)
Packaging: 20 kg bucket (subject to actual packaging)
Storage: Should be stored in a cool, ventilated, dry place without frost (5~35) °C, with a shelf life of one year.
Construction Instructions
Surface treatment: Before painting, the substrate surface should be clean, dry, flat, and firm.
For newly constructed walls, remove surface dust, grease, and loose mortar, and repair any gaps in a timely manner.
For repainting walls, use a scraper to remove the original paint film, fill and smooth the surface. Use appropriate methods as needed. Ensure the moisture content of the pre-coated substrate does not exceed 10%, and the pH value does not exceed 10. Construction methods: brushing, rolling, high-pressure airless spraying.
Mixing and dilution: Add (10~20)% clean water for dilution based on site conditions. Construction conditions: construction temperature (5~35) °C; maximum relative humidity 85%. Recoating interval: not less than 2 hours (23°C).
Tool cleaning: Immediately clean all tools with water after painting.
Precautions: After applying exterior latex paint, consider that the latex paint requires a week of water avoidance time. During this period, the latex paint undergoes a complete drying process. If it is not fully dried and gets rained on, the latex paint may fade or turn white. Be sure to avoid rain on the latex paint after construction.
Technical Parameters
Health and Safety
Avoid contact of the paint with eyes; if contact occurs, rinse with clean water. The site must be well-ventilated, and all health and safety regulations must be followed.
Note: The above information and data are based on laboratory and practical experience, and may vary due to factors such as construction processes, testing methods, and paint improvements.
Note: The above information and data are based on laboratory and practical experience, and may vary due to factors such as construction processes, testing methods, and paint improvements.
Key words:
Nano exterior wall paint (pearl paint)
Previous Page:
Next page:
Message
Related Products
Message
* Note: Make sure you fill in the information accurately and keep the communication open, we will contact you as soon as possible.
Contact Us
No.19, Jingkai Second Avenue, Zhengzhou Economic and Technological Development Zone, China
Telephone
Page Copyright©Henan Dejiali Technology Group Co., Ltd.
Powered by :www.300.cn Supported IPV6 Privacy Agreement
