Products
Architectural exterior fluorocarbon paint (solid color paint) D-FC-202
Category:
Exterior Wall Latex Paint Series
Tel:
E-mail:
Introduction
Product Description
This product is a two-component fluorocarbon paint made from fluorocarbon resin and pigments, formulated with special additives and solvents. It is suitable for aging-resistant decorative protective coatings for various building exterior walls, roofs, and various building materials.
Product Features
Super weather resistance, corrosion resistance, strong self-cleaning.
Strong adhesion, high decorative quality, waterproof, mold-resistant, acid-resistant, alkali-resistant. Good film properties: flexibility, scratch resistance, washability. Excellent resistance to fading, cracking, chalking, and wear.
Physical Parameters
Color: Please refer to the Degali color card, can also be formulated according to customer requirements. Solid content: ≥50%.
Density: (1.10~ 1.35) g/ml. Flash point: above 25℃.
Drying time: surface dry in 30 minutes, fully dry in 24 hours, completely cured in 7 days. Temperature (23±2) ℃. Theoretical coverage: (6~8) square meters/kg (dry film thickness 30 microns).
Mixing ratio: for non-gloss, matte, and high-gloss products A component: B component (1:0.060) (by weight), refer to packaging label. Usable period: use within 8 hours after mixing. Temperature (23±2) ℃.
Storage: Store in a cool, dry place, effective storage period A component one year, B component six months. Packaging: 24 kg/set.
Construction Instructions
Surface treatment: The substrate surface should be clean, dry, flat, and firm before painting, free of grease, rust, and other debris, with a wall moisture content of less than 8% and a pH value of less than 10. It is recommended to use Degali fluorocarbon paint to level the putty to fill gaps and sand it smooth.
Dust treatment: can be blown clean with compressed air or swept with a clean brush.
Old paint film treatment: scrape off with a knife, fill and sand smooth, or use other methods as appropriate. Construction methods: suitable for conventional spraying, brushing, and rolling, dilution ratio (0~20)% (by weight).
Construction conditions: construction temperature (5~40)℃; relative humidity less than 75%, avoid construction in rain, snow, or fog, and prohibit contact with water and alcohols. Before construction, mix and stir A and B components according to the ratio, use after 30 minutes of maturation, and complete within 8 hours.
Recommended matching: D-FC-601 single-component epoxy sealing primer (two coats); D-FC-301 fluorocarbon paint special intermediate paint (two coats); D-FC-202 building exterior wall fluorocarbon paint (solid color paint) (two coats) thinner: D-X-2 thinner.
Film thickness: wet film: 70 microns; dry film: 30 microns.
Coating interval: brushing and rolling minimum 8 hours, temperature (23±2) °C. Tool cleaning: D-X-2 thinner.
Safety and Environmental Instructions
Avoid contact with skin and eyes; if contact occurs, rinse with clean water. The site must be well-ventilated. The paint contains flammable components, please keep away from sparks and prohibit smoking in nearby areas. Comply with all health and safety regulations on site.
Key words:
Architectural exterior fluorocarbon paint (solid color paint) D-FC-202
Previous Page:
Message
Related Products
Message
* Note: Make sure you fill in the information accurately and keep the communication open, we will contact you as soon as possible.
Contact Us
No.19, Jingkai Second Avenue, Zhengzhou Economic and Technological Development Zone, China
Telephone
Page Copyright©Henan Dejiali Technology Group Co., Ltd.
Powered by :www.300.cn Supported IPV6 Privacy Agreement
