Products
Nano exterior wall paint (lotus leaf paint)
Category:
Exterior Wall Latex Paint Series
Tel:
E-mail:
Introduction
Product Overview
This product is made from high-quality acrylic emulsion, pigments, and additives refined with nanomaterials. It is widely applicable for various building exterior wall cement surface decorations using cement, concrete, bricks, and other building materials as the substrate.
Product Characteristics
1. Utilizing the absorption of ultraviolet light and photocatalytic function of nanoparticles, it enhances the paint's aging resistance, has strong weather resistance, and a lifespan of over ten years.
2. The small particle size and large specific surface area of nanoparticles allow the polymer macromolecular chains in the paint to organically combine with the nanoparticles, thereby improving the toughness, strength, and adhesion of the paint film.
3. Utilizing the dual-repellent principle of nanoparticles, the paint film has waterproof and anti-fouling properties, exhibiting a "lotus leaf" hydrophobic self-cleaning effect.
4. Extremely resistant to scrubbing, can withstand over 10,000 times.
5. Inorganic coloring, bright colors, and good durability.
6. Good water resistance, acid resistance, alkali resistance, and anti-algae properties.
Physical Parameters
Solid Content: ≥50%.
Density: (1.35~1.40) grams per milliliter (light color) Color: Refer to the Degali color card.
Drying Time: ≤2 hours (23+2) °C Recoating Time: ≥2 hours (23+2) °C Theoretical Coverage Rate: 5 square meters/kilogram (two coats).
Packaging: 20 kilograms/barrel (subject to actual packaging).
Storage: Should be kept in a cool, ventilated, dry place without frost (5~35) °C, effective.
Storage Period: One year.
Construction Instructions
Surface Treatment: Before painting, the substrate surface should be clean, dry, flat, and firm.
For newly constructed walls, remove surface dust, grease, and loose mortar, and repair any gaps in a timely manner. For repainting walls, use a scraper to remove the original paint film and fill and smooth the surface. Use appropriate methods as needed.
Ensure that the moisture content of the pre-coated substrate does not exceed 10%, and the pH value does not exceed 10. Construction methods: brushing, rolling, high-pressure airless spraying.
Mixing and Dilution: According to the site conditions, add (10~20)% of clean water for dilution. Construction conditions: construction temperature (5~35) °C; maximum relative humidity 85%. Recoating interval: no less than 2 hours (23°C).
Tool Cleaning: Immediately clean all tools with water after painting.
Precautions: After applying the exterior wall latex paint, consider that the latex paint requires a week of water avoidance time. During this period, the latex paint undergoes a complete drying process. If it is not fully dried and gets rained on, the latex paint may fade and turn white. Be sure to avoid rain on the latex paint after construction.
Health and Safety
Avoid contact of the paint with eyes; if contact occurs, rinse with clean water. The site must be well-ventilated, and all health and safety regulations must be followed.
Note: The above information and data are based on laboratory and practical experience, and may vary due to factors such as construction processes, testing methods, and paint improvements.
Note: The above information and data are based on laboratory and practical experience, and may vary due to factors such as construction processes, testing methods, and paint improvements.
Key words:
Nano exterior wall paint (lotus leaf paint)
Previous Page:
Message
Related Products
Message
* Note: Make sure you fill in the information accurately and keep the communication open, we will contact you as soon as possible.
Contact Us
No.19, Jingkai Second Avenue, Zhengzhou Economic and Technological Development Zone, China
Telephone
Page Copyright©Henan Dejiali Technology Group Co., Ltd.
Powered by :www.300.cn Supported IPV6 Privacy Agreement
