Products
Water-based inorganic zinc-rich paint
Category:
Water-based metallic paint series
Tel:
E-mail:
Introduction
Widely used: This product is a two-component water-based metal paint made of water-based inorganic zinc-rich paint special resin, high-grade zinc powder, and special additives, widely used in oil tanks, ships, transmission towers, steel structure bridges in harsh environmental conditions, large steel frames, offshore platforms, etc.
Product features:
Non-toxic and pollution-free, zero VOC emissions;
Can continuously withstand high temperatures of 400°C - 500°C or more; ★ Flexibility is better than solvent-based inorganic zinc-rich paint;
After 30 minutes of surface drying, the coating can withstand certain pressure water washing; ★ The paint film can be compatible with various anti-corrosion coatings, maintaining long-lasting corrosion resistance;
Excellent resistance to organic solvents, with outstanding electrochemical corrosion resistance;
Low resistivity, anti-static, radiation-resistant, aging-resistant, salt spray-resistant, UV-resistant;
Main products of water-based special industrial paint
1. Water-based silver powder paint;
2. Water-based pearl paint;
3. Water-based paint for glass substrates 4. Water-based paint for plastic substrates.
Friendly reminder for water-based metal paint construction
Construction preparation: Stir the paint evenly, if the viscosity is too high, you can add an appropriate amount of tap water to dilute, and it is strictly prohibited to add various solvent-based thinners.
Construction environment: Ambient temperature > 0°C, humidity < 70%, indoor construction should strive for ventilation and sunlight to assist drying; outdoor construction should be free of rain, fog, and wind.
Tool cleaning: Rollers, sprayers, brushes, and various construction tools must be promptly rinsed with tap water when not in use.
Transportation and storage: Water-based metal paint is flame-retardant and explosion-proof, with no explosion hazard, stored in a cool place, and protected from direct sunlight.
Re-coating requirements: The interval time between the second re-coating and the first coating should be greater than 4 hours; if the paint film is thick or the temperature is low, the interval time should be extended.
Key words:
Water-based inorganic zinc-rich paint
Previous Page:
Message
Related Products
