Products
Steel structure imitation fluorocarbon paint
Category:
Architectural Fluorocarbon Paint Series
Tel:
E-mail:
Introduction
Construction Reference
1. Requirements for the surface to be coated:
a. No oil stains, no dust, no rust. b. The surface is clean and not damp.
2. Primer: can be sprayed or brushed.
Use special primer and thinner for nitrogen coatings.
Film thickness: dry film thickness: 30 microns.
Drying time: 25℃, 24 hours.
3. Requirements for the surface of the primer:
a. The base layer is uniform, no leaks, not rough, good adhesion.
b. The base layer is defect-free, flat, no dust, no oil stains, not damp.
4. Topcoat:
Mixing ratio: Group A: Group B 1:0.045 (weight ratio). Use special thinner D-X-2 to adjust the viscosity of the paint.
Curing time: under conditions of 15-40℃, cure for 30-50 minutes before spraying.
Usable period: 25℃, 8 hours; 35℃, 6 hours; can be adjusted according to temperature.
5. Spray topcoat: can be sprayed or brushed.
Generally, two coats of topcoat are sufficient. Dry film thickness 20±5 microns/coat. Interval time 1-2 hours.
The interval time between the topcoat and primer should be 24 hours (should be tested first to ensure no biting through before spraying).
6. Drying time: surface dry at 25℃: 20 minutes; fully dry: 24 hours; completely cured: 7 days.
7. The number of spraying coats and thickness of primer and topcoat should be based on the usage conditions and design requirements of the coated object.
Storage: Store in a cool, dry place, away from fire sources. Effective storage for one year.
Packaging: Metal paint: 18kg/set; solid color paint: 24kg/set.
Key words:
Steel structure imitation fluorocarbon paint
Message
Related Products
Message
* Note: Make sure you fill in the information accurately and keep the communication open, we will contact you as soon as possible.
Contact Us
No.19, Jingkai Second Avenue, Zhengzhou Economic and Technological Development Zone, China
Telephone
Page Copyright©Henan Dejiali Technology Group Co., Ltd.
Powered by :www.300.cn Supported IPV6 Privacy Agreement
