Products
Eco-friendly latex paint, exterior matte silk finish paint series D-WQ-820, D-WQ-830, D-WQ-860.
Category:
Exterior Wall Latex Paint Series
Tel:
E-mail:
Introduction
Product Overview
This product is made from high-performance pure acrylic copolymer emulsion, pigments, fillers, additives, etc., processed by advanced technology. It is widely applicable for various building exterior wall cement surface decorations based on building materials such as cement, concrete, and bricks.
Product Characteristics
1. Excellent water resistance, alkali resistance, strong scrub resistance, and strong adhesion. 2. Excellent coating water resistance and breathability. 3. Excellent coating weather resistance.
Physical Parameters
Solid content: ≥50%
Density: (1.35~1.40) grams per milliliter (light color) Color: Refer to the Degali color card.
Drying time: surface dry in 2 hours (23±2) °C Recoating time: ≥2 hours (23±2) °C Theoretical coverage rate: 5 square meters/kilogram (two coats)
Packaging: 20 kilograms/barrel (subject to actual packaging)
Storage: Should be stored in a cool, ventilated, dry, and frost-free place, with a valid storage period of one year.
Construction Instructions
Surface treatment: Before painting, the substrate surface should be clean, dry, flat, and firm.
For newly constructed walls, remove surface dust, grease, and loose mortar, and repair any gaps in a timely manner.
For repainting walls, use a scraper to remove the original paint film, fill and smooth with putty. Use appropriate methods as needed. Ensure that the moisture content of the pre-coated substrate does not exceed 10%, and the pH value does not exceed 10. Construction methods: brushing, rolling, high-pressure airless spraying.
Mixing and dilution: Dilute with (10~20)% clean water according to site conditions. Construction conditions: construction temperature (5~35) °C; maximum relative humidity 85%. Recoating interval: not less than 2 hours (23°C).
Tool cleaning: Clean all tools immediately with water after painting.
Precautions: After applying exterior wall latex paint, consider that the latex paint has a one-week water avoidance period. During this time, the latex paint undergoes a complete drying process. If it is not completely dry and gets rained on, the latex paint may fade and turn white. Be sure to avoid rainwater after construction.
Technical Parameters
Health and Safety
Avoid contact with eyes; if contact occurs, rinse with clean water. The site must be well-ventilated, and all health and safety regulations must be followed.
★★Note: The above data and information are based on laboratory and practical experience, and may vary due to factors such as construction processes, testing methods, and paint improvements.
Key words:
Eco-friendly latex paint, exterior matte silk finish paint series D-WQ-820, D-WQ-830, D-WQ-860.
Message
Related Products
Message
* Note: Make sure you fill in the information accurately and keep the communication open, we will contact you as soon as possible.
Contact Us
No.19, Jingkai Second Avenue, Zhengzhou Economic and Technological Development Zone, China
Telephone
Page Copyright©Henan Dejiali Technology Group Co., Ltd.
Powered by :www.300.cn Supported IPV6 Privacy Agreement
