Products
Concrete anchor agent
Category:
Floor paint
Tel:
E-mail:
Introduction
Product Features:
Strong adhesion, crack resistance, high compressive strength, waterproof and UV resistant, simple process.
Applicable Scope:
1. For damaged floors or road surfaces;
2. For exposed reinforced concrete in corrosive environments;
3. For surfaces of garages or roads that are sandy;
4. Can be constructed in humid environments.
Construction Process:
1. First, rough grind the surface to be constructed, clean the dust, and perform waterproof treatment;
2. If the surface is dry, it needs to be moistened beforehand. Without visible water, spray the concrete anchoring agent, then during the time the concrete anchoring agent evaporates, quickly mix coarse sand, fine sand, and cement evenly, then add the concrete anchoring agent in a certain proportion and mix evenly without dry powder, and directly trowel it on the surface sprayed with the concrete anchoring agent. Depending on the situation, one to two coats may be sufficient.
Key words:
Concrete anchor agent
Previous Page:
Next page:
Message
Related Products
Message
* Note: Make sure you fill in the information accurately and keep the communication open, we will contact you as soon as possible.
Contact Us
No.19, Jingkai Second Avenue, Zhengzhou Economic and Technological Development Zone, China
Telephone
Page Copyright©Henan Dejiali Technology Group Co., Ltd.
Powered by :www.300.cn Supported IPV6 Privacy Agreement
