Products
Durable and economical epoxy flooring
Category:
Floor paint
Tel:
E-mail:
Introduction
Thickness: 0.3mm, 0.5mm
Floor characteristics:
Seamless dustproof, wear-resistant and non-slip, acid and alkali resistant, mildew and waterproof, easy to clean, simple maintenance, beautiful appearance, diverse colors, easy construction, low cost.
Applicable scope:
1. Clothing factories, printing factories, toy factories, textile factories;
2. Warehouses, parking lots, electronics factories, product factories, and other occasions without heavy pressure.
Construction process
1. Waterproof treatment: The ground on the first floor must have been treated for waterproofing;
2. Base treatment: Grind, repair, and dust removal according to the condition of the base;
3. Newly completed cement floors need to undergo a certain curing period before construction (generally about 3 weeks in summer, about 6 weeks in winter). The ground must be hard, flat, free of oil stains, moisture content <6%, strength >24, flatness ≤2mm/M, PH< 8;
4. Epoxy sealing primer: Apply one or two coats of highly permeable and adhesive epoxy sealing primer according to the condition of the ground to enhance surface adhesion;
5. Scrape epoxy self-leveling intermediate coating: Mix the paint and hardener in the correct ratio, and apply several coats as needed, requiring a smooth surface without holes, knife marks, or sanding marks;
6. Epoxy topcoat: Apply two coats of solvent-based epoxy floor paint, and the finished floor should be bright, clean, uniform in color, and free of hollow spots;
7. Completion of construction: Can be walked on after 24 hours, can bear weight after 72 hours, and can be used after 7 days of complete curing (based on 25C, low temperatures require appropriate extension of open time)
Construction parameters:
Mixing ratio of epoxy sealing primer: Main paint: hardener = 2:1 (weight ratio) Reference usage 0.2kg/m (two coats);
Mixing ratio of epoxy self-leveling intermediate coating: Main paint: hardener = 5:1 (weight ratio) Reference usage depends on the thickness of the paint film, and a certain amount of quartz sand can be added to enhance hardness and wear resistance based on the condition of the ground;
Mixing ratio of epoxy topcoat: Main paint: hardener = 3:1 (weight ratio) Reference usage 0.2~0.3kg/㎡
Construction conditions:
It is recommended to use at 10C-40C. To avoid condensation, the construction base must be dry and clean, and the relative humidity of the air < 80%.
Statement: The technical reference standards and instructions for this product are for the buyer's reference only.
Process illustration:
Key words:
Durable and economical epoxy flooring
Previous Page:
Next page:
Message
Related Products
Message
* Note: Make sure you fill in the information accurately and keep the communication open, we will contact you as soon as possible.
Contact Us
No.19, Jingkai Second Avenue, Zhengzhou Economic and Technological Development Zone, China
Telephone
Page Copyright©Henan Dejiali Technology Group Co., Ltd.
Powered by :www.300.cn Supported IPV6 Privacy Agreement
