Products
Concrete sealing and curing agent
Category:
Floor paint
Tel:
E-mail:
Introduction
Product Introduction:
Dejiali concrete sealing and curing agent is a water-based, colorless, transparent, long-lasting concrete hardening product made from fluorosilicone polymers and lithium silicate compounds, combined with advanced nanotechnology. It possesses the dual properties of fluorosilicone polymers and lithium silicate salts, enhancing the density and dust-proof functions of concrete.
Product Features:
Hardness: The surface treated with Dejiali concrete sealing and curing agent shows a significant increase in hardness, with strong permeability and uniform reaction, achieving a Mohs hardness of over 7, increasing hardness by about 30%.
Wear Resistance: It solidifies with various components in the concrete to form a hard entity, increasing wear resistance by more than 5 times.
Sealing and Dust-proof: It creates a solid, impermeable entity that permanently prevents the intrusion of water, chemicals, and other external substances; it blocks moisture return, has a smooth surface, and does not allow sand to run.
Environmentally Friendly: Non-polluting, colorless, odorless, and non-flammable. It has excellent environmental protection and sustainability.
Economical and Practical: Relatively low cost, one-time use, permanently effective.
Applicable Occasions: Industrial floors, workshop floors, supermarket floors, parking lots, concrete highways, airport runways, concrete bridges, docks, concrete walls, sports centers, and all places with concrete or cement mortar as the base.
Scope of Application:
1. Used for surface hardening of new and old concrete floors to prevent dust and improve the durability of the floor.
2. Suitable for concrete and artificial stone floors.
3. Typical applications include: industrial floors, light industrial factories, warehouses, farms, dairy farms, slaughterhouses, parking lots, and logistics warehouses.
4. Can be used for surface hardening treatment of precast components.
5. Also applicable to areas such as bridges, dams, airport runways, roads, and exterior wall protection.
Construction Process:
1. First, thoroughly grind the floor with 50-300 mesh grinding discs, and use a vacuum cleaner or other tools to completely clean the floor dust, allowing the floor's capillaries to fully absorb the material; continue grinding until the surface feels smooth before applying (1:1 diluted with water).
2. After the floor dries, apply 1-3 coats (1:1 diluted with water) until the base no longer absorbs. (Within 0.5-1 hour, spray clean water and use a floor scrubber to clean the surface, and use a vacuum cleaner to clean excess material from pits and capillaries.) Otherwise, after the surface dries, excess crystallization may occur due to surplus material, allowing it to cure naturally for 4-12 hours, depending on the base condition and weather.
3. After curing and once the floor is completely dry, grind with 500-800 mesh grinding discs 1-2 times, and use a vacuum cleaner to clean the surface.
4. Once the floor is dry, use a sprayer to evenly apply the curing agent on the floor (within about 20-30 minutes, spray clean water and use a floor scrubber to clean the surface, and use a vacuum cleaner to clean excess material from pits and capillaries), then let it react for about 20-40 minutes before fine grinding with 1000-3000 mesh grinding discs until the desired result is achieved.
Key words:
Concrete sealing and curing agent
Previous Page:
Next page:
Message
Related Products
Message
* Note: Make sure you fill in the information accurately and keep the communication open, we will contact you as soon as possible.
Contact Us
No.19, Jingkai Second Avenue, Zhengzhou Economic and Technological Development Zone, China
Telephone
Page Copyright©Henan Dejiali Technology Group Co., Ltd.
Powered by :www.300.cn Supported IPV6 Privacy Agreement
