Products
Fluorocarbon paint leveling putty D-NZ-7
Category:
Exterior Wall Putty Series
Tel:
E-mail:
Introduction
Product Description
This product is a new type of high-strength adhesive and wall leveling filler, suitable for the leveling treatment of various cement walls and brick surfaces.
Product Features
Strong adhesion. Non-toxic and non-flammable.
Resistant to weak acids, alkalis, and oils after curing, with excellent dissolution resistance.
No need to wet the brick wall during construction, which can significantly improve work efficiency and is convenient and quick.
Material-saving, can reduce construction waste and wall weight compared to traditional cement paste. It has good impermeability and aging resistance.
Technical Parameters
Adjustment time: (20~25) minutes. Resting time: (5~15) minutes. Initial drying time: (20°C) 2 hours.
Curing time: 24 hours (depending on climate). Water resistance: excellent.
Shear strength: 1.38Mpa (after 7 days), 1.7Mpa (after 14 days).
Storage: Store in a cool, dry place, unopened products can be stored for 1 year. Packaging: 25 kg bag.
Construction Instructions
Surface treatment: The substrate surface should be solid, flat, dry, and clean, free of grease, wax, concrete curing agents, release agents, and other loose materials.
Construction process: First pour water into the container, then add the powder, and then use a mixer to stir thoroughly until it is a paste without powder particles or sediment. If the paste is stirred again after standing for ten minutes, it can increase strength. Use a trowel for application, and the second layer can be applied about 8 hours after the first layer is completed.
Usage: Approximately (1.5~2) kg per square meter, depending on the flatness of the base.
Precautions
Before construction, the verticality and flatness of the substrate should be determined. Do not mix water with already cured paste. This product is suitable for construction in an environment of (5~40) °C.
The mixed putty should be used within 2 hours in summer and within 4 hours in winter. It is advisable to sand within one to two days.
Key words:
Fluorocarbon paint leveling putty D-NZ-7
Next page:
Message
Related Products
Message
* Note: Make sure you fill in the information accurately and keep the communication open, we will contact you as soon as possible.
Contact Us
No.19, Jingkai Second Avenue, Zhengzhou Economic and Technological Development Zone, China
Telephone
Page Copyright©Henan Dejiali Technology Group Co., Ltd.
Powered by :www.300.cn Supported IPV6 Privacy Agreement
