Products
Single-component acrylic floor (oil-based cement paint)
Category:
Floor paint
Tel:
E-mail:
Introduction
Thickness: 0.3mm
Floor characteristics: single component, easy to use, low cost, quick drying, easy construction, strong adhesion, dustproof, diverse colors.
Scope of application:
1. Various factories, offices, and other places with low requirements;
2. Warehouses and factories without heavy pressure and chemical solvents.
Construction process:
1. Waterproof treatment: the ground floor must have been treated for waterproofing;
2. Base treatment: perform grinding, repair, and dust removal according to the condition of the base;
3. Newly completed cement floors need to undergo a certain curing period before construction (generally about 3 weeks in summer, about 6 weeks in winter). The ground must be hard, flat, free of oil stains, with a moisture content <6%, strength >24, flatness ≤2mm/M, PH<8;
4. Acrylic topcoat: roll on two coats of topcoat, and after completion, ensure the overall floor is bright, clean, and uniformly colored.
Construction completion: can be walked on after 12 hours, can bear heavy pressure after 48 hours (based on 25C, lower temperatures require appropriately extended opening time).
Construction conditions: the construction surface must be clean and dry, environmental humidity ≤80%, 40~60% is optimal. During construction and drying in narrow spaces, good ventilation should be maintained.
Statement: The technical reference standards and instructions for this product are for the buyer's reference only.
Process illustration:

Key words:
Single-component acrylic floor (oil-based cement paint)
Previous Page:
Next page:
Message
Related Products
