Products
Colored sand epoxy flooring
Category:
Floor paint
Tel:
E-mail:
Introduction
Thickness: 3.0mm, 5.0mm
Floor characteristics: scratch resistance, anti-slip, unlimited color combinations, heavy load resistance, wear resistance, impact resistance, aesthetically pleasing.
Applicable scope:
1. Food factories, grease and meat processing plants;
2. Chemical plants, heavy machinery factories, hardware factories;
3. Automobile manufacturing plants, shipyards, sales companies, etc.
Construction process:
1. Waterproof treatment: The ground on the first floor must have been treated for waterproofing;
2. Base treatment: Grind, repair, and dust removal according to the condition of the base;
3. Newly completed cement floors need to undergo a certain curing period before construction (generally about 3 weeks in summer, about 6 weeks in winter). The ground must be hard, flat, free of oil stains, moisture content <6%, strength >24, flatness ≤2mm/M, PH < 8.
4. Epoxy sealing primer: Apply one or two coats of highly permeable and adhesive epoxy sealing primer according to the condition of the ground to enhance surface adhesion;
5. Epoxy colored sand intermediate coat: Mix paint and hardener in proportion, add an appropriate amount of colored sand, and evenly apply one coat with a trowel;
6. Epoxy transparent topcoat: Evenly roll on two coats of epoxy transparent topcoat or apply one coat with a trowel, ensuring the overall floor is bright, clean, uniformly colored, and free of blisters.
7. Completion of construction: Can be walked on after 24 hours, can bear heavy loads after 72 hours, and can be used after complete curing in 7 days (based on 25°C, low temperatures require appropriate extension of open time).
Construction parameters:
Mixing ratio of epoxy sealing primer: Main paint: hardener = 2:1 (weight ratio) Reference usage 0.2kg/㎡ (two coats)
Mixing ratio of epoxy colored sand intermediate coat: Main paint: hardener = 2:1 (weight ratio) Reference usage depends on the thickness of the paint film, add an appropriate amount of colored sand to enhance hardness and wear resistance based on the condition of the ground.
Mixing ratio of epoxy transparent topcoat: Main paint: hardener = 2:1 (weight ratio) Reference usage 0.2kg/m² (two coats)
Construction conditions: Recommended for use at 10°C~40°C, to avoid condensation of moisture, the construction base must be dry and clean, and the relative humidity of the air < 80%.
Statement: The technical reference standards and instructions for this product are for the buyer's reference only.
Process diagram:
Key words:
Colored sand epoxy flooring
Previous Page:
Message
Related Products
Message
* Note: Make sure you fill in the information accurately and keep the communication open, we will contact you as soon as possible.
Contact Us
No.19, Jingkai Second Avenue, Zhengzhou Economic and Technological Development Zone, China
Telephone
Page Copyright©Henan Dejiali Technology Group Co., Ltd.
Powered by :www.300.cn Supported IPV6 Privacy Agreement
